home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.19980901-19981211
/
000217_news@newsmaster….columbia.edu _Tue Oct 27 07:09:36 1998.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
3KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id HAA03948
for <kermit.misc@watsun.cc.columbia.edu>; Tue, 27 Oct 1998 07:09:34 -0500 (EST)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id HAA10330
for kermit.misc@watsun; Tue, 27 Oct 1998 07:09:33 -0500 (EST)
Path: news.columbia.edu!news.new-york.net!cpk-news-hub1.bbnplanet.com!news.news.gtei.net!news-fra.maz.net!newsfeed.ecrc.net!newsfeed2.ecrc.net!news.siemens.de!news.mch.sbs.de!not-for-mail
From: Muljawan Hendrianto <muljawan.hendrianto@siemens.com.sg>
Newsgroups: comp.protocols.kermit.misc
Subject: Re: newbie question:atdt command works but not using dial command
Date: Tue, 27 Oct 1998 18:25:45 +0800
Organization: Siemens Inc.
Lines: 63
Message-ID: <36359FA8.B12A7FAD@siemens.com.sg>
References: <363441A7.90910EC@siemens.com.sg> <7126lf$lb7$1@apakabar.cc.columbia.edu>
NNTP-Posting-Host: muljawan.siemens.com.sg
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 4.01 [en] (WinNT; I)
X-Priority: 3 (Normal)
Xref: news.columbia.edu comp.protocols.kermit.misc:9417
Frank da Cruz wrote:
> :
> This indicates a total failure to communicate with the modem. The
> manual
> goes into great detail about how to set up and troubleshoot modem
> connections.
>
> You didn't show the sequence of commands you used. It should have
> been:
>
> set modem type motorola-montana
> set line /dev/ttyS1
> set speed 38400
> dial 97407554
>
> in that order; the order is important.
>
> A couple other hints:
>
> 1. Use "set dial display on" to monitor the dialog between Kermit and
>
> the modem.
>
Thanks Frank,
After I did "set dial display on", I saw the dialog between Kermit and
the modem.
It seems that I init string is not working with my modem , since I don't
use the motorola-montana. I did follow the step you mentioned above.
My modem is Motorola Codex 3265, so it seems that I need to put in the
right init-string.
How can I do that?
thanks,
Muljawan
Device: /dev/cua1, modem: motorola-montana, speed: 38400
Dial timeout: 43 seconds
To cancel: type your interrupt character (normally Ctrl-C).
+++ATQ0H0
OK
Modem hangup OK
Initializing: 15:33:30...
ATQ0E1X4\K5\V1
ATQ0E1X4\K5\V1
ERROR
No response from modem, retrying...
ATQ0E1X4\K5\V1
ERROR
No response from modem, retrying again...
ATQ0E1X4\K5\V1
ERROR
No response from modem, retrying again...
ATQ0E1X4\K5\V1
ERROR
DIAL Failure: 15:33:31: Error initializing modem.